Rtsp/Rtp (Multicast Or Unicast) - Ganz H.264 Network Encoder Series User Manual

GANZ Network camerab and encoder series

4.5.7. RTSP/RTP (multicast or unicast)

GANZ H.264 Network camera and encoder support the multicast and unicast streaming for
st
both of 1 stream and 2
above shows and configure the RTP session as required by your network system.
RTSP Configuration
To start the data streaming such as video, audio or metadata from the GANZ encoder and
network camera server, tick the box of Enable RTSP Server. If you remove the check in the box,
the streaming stops from server and the real time view is not seen on the web page.
Below is the requesting format of URL and Port for RTSP streaming. Each of IP address, port,
and session name are open to be typed by user.
2010/2‐1 03A.00
nd
stream. Click the tab of MULTICAST and UNICAST as the picture
Webpage User's Manual
Can be configured
separately by clicking
on the name, multicast
or unicast
50