Ganz H.264 Network Encoder Series User Manual page 68

GANZ Network camerab and encoder series
When the RS485‐PTZ is selected, the required PTZ protocol and the control daemon are run
and assigned to the serial communication internally.
External
rd
When 3 party program is added to the server side of NVC and this add‐on program needs to
control the attached serial devices, you should select the External option. So, if you do not use
any serial control program, you can ignore this external option.
SerialOverIP
What is SerialOverIP?
When you want to read/write the serial data from attached serial device over the network,
you can select this 'SerialOverIP' option. Refer to the drawing below for more specific schema.
Client PC
IP address / port
required
You can find the test tool for SerialOverIP at \BIN\TOOLS\ SerialOverHttp.exe of NVC SDK.
NOTE : This tool is designed to test a 'writing only' for data sending from PC to NVC. For the
opposite direction (from NVC to PC), you should use another program or use HTTP API. NVC
HTTP API Manual.pdf at \DOC of NVC SDK will help you to use HTTP API of serial data
communication. Refer to the section 0.6.3. Serial2.fcgi.
PTZ Protocol
PTZ Name : You need to set the UART type as RS485‐PTZ before selecting the PTZ protocol. If
you click the drop down box of PTZ name, the available protocols are listed. Choose the
required protocol to communicate with your camera.
PTZ Address : Type the PTZ address as you have set on your PTZ camera. You may find the dip
switch at the bottom of the PTZ camera which enables the cameras to have their own address.
Refer to your PTZ camera hardware manual for the PTZ address setting.
Baud Rate, Data, Parity, Stop, Flow Control
These settings are necessary when you want your serial device to be communicated with the
GANZ ENCODER AND NETWORK CAMERA series. The default values of web page are set for the
RS485 PTZ device but you can set the values according to your own device requirement.
2010/2‐1 03A.00
Network
GANZ ENCODER
Select the com port of PC
Select the type 'NVC'
Type the IP address of PC
Webpage User's Manual
Serial
Communication
Serial device (e.g.
PTZ camera)
68