GANZ Network camerab and encoder series
Webpage User's Manual
4.7. MAINTENANCE
4.7.1. Firmware Update port setting
Firmware update is allowed only by the ZNS‐GIT IPAdimn Tool.exe, which is provided in the
SDK (\BIN\TOOLS\AdminTool vX.X.X.X). Refer to the 'NVC Tools User's Manual.pdf' to find out
how to update the firmware on your GANZ ENCODER AND NETWORK CAMERA.
Before you upload the firmware with ZNS‐GIT IPAdimn Tool.exe, check the 'Enable Firmware
Update' box and set the port number. If you remove the check this box, updating the firmware
is not allowed.
2010/2‐1 03A.00
69