Ganz H.264 Network Encoder Series User Manual page 58

GANZ Network camerab and encoder series
Step 2. Selecting the recording storage
You can choose one of the recording storage devices, SD card or USB Memory.
Step 3. Recycling options
You can choose one of the options when the storage is full of data
•
Stop recording: Stops recording and keep the recoded data.
•
Delete files and recycle (oldest first) : Replace old files with newly created files.
Step 4. Decision of filename
Type the file name that ends with _YYYYMMDD_hhmmss.avi. For easier recognition of
multiply created files, the end of every recording file name includes the date and time
information as a default.
Step 5. Segmentation of files
•
Check the 'Do not segment' if you want to create the recording data as one file.
•
Segmentation by file size: Type the size of file. The range of the file size is from 1 to
1440 Megabyte(s).
•
Segmentation by time base: Type the minutes to segment. The range of the file size is
from 1 to 60 minute(s).
Step 6. Selecting stream source for primary option
You can choose primary recording source from either 1st stream or 2nd stream. It's not
allowed to record both of them at the same time. If you check 'None', the GANZ ENCODER
AND NETWORK CAMERA does not record neither of 1st stream nor 2nd stream.
Option. Recording secondary stream (snapshot stream)
Why secondary recording is required?
As you have found on the GANZ ENCODER AND NETWORK CAMERA specification, GANZ
ENCODER AND NETWORK CAMERA supports the multiple streams. For each of camera
input source, the GANZ ENCODER AND NETWORK CAMERA is able to generate 1st stream,
2nd stream, and Snapshot stream, which is called triple stream. The secondary recording
setting is prepared for the 'snapshot stream'. Regardless of the codec type of 1st or 2nd
stream, the snapshot stream can be generated and recorded separately.
Do not want to record the snapshot stream?
Select None at the end of stream source options.
Selecting the stream source for recording
Secondary recording is prepared for the users who want to record the stream of snapshot.
This is operated separately from the primary recording and you can get the continuous shot
with JPEG format. Set the resolution, quality and fps of the recoding image.
Customizing the resolution
If you choose CUSTOM as the value of the resolution, you're able to set the image size as
you want regardless of the fixed standard size. Type the pixels in the fields of width and
height.
2010/2‐1 03A.00
Webpage User's Manual
58