Event Configuration - Ganz H.264 Network Encoder Series User Manual

GANZ Network camerab and encoder series

4.4. EVENT CONFIGURATION

NOTE : This Event setting page is based on 1 channel encoder, ZN‐S1000VE. If your camera or
encoder model is other than ZN‐S1000VE, move to the chapter '6.REFERENCE TO MODEL'
and you can refer to the different part only from this page.
GANZ ENCODER AND NETWORK CAMERA series is equipped with the event server program
internally and it enables you to configure the event publishers and subscribers. For instance, DI,
DO, Video loss, Motion Detection, VCA (video contents analysis), Network loss, IP change, and
health of network server can publishes the event message when an event is generated.
How to move to each subscriber setting page
Below is an example page of DI page. Click each subscriber name such as DO and you can find
that they are linked to the related setting pages. Refer to the figures of below for more specific
information.
2010/2‐1 03A.00
Linked
Setup ‐ IO Configuration ‐ DI/DO
Multicast setting page (
Multicast setting page (
TCP setting page (
HTTP setting page (
FTP setting page (
Webpage User's Manual
Picture A
)
Picture B
)
Picture C
)
Picture D
)
Picture E
)
33