Ganz H.264 Network Encoder Series User Manual page 59

GANZ Network camerab and encoder series Webpage User's Manual
Step 7. If you have finished the setting above, click the Apply button to save and apply the
setting.
Step 8. Now, click START or STOP button to start or stop recording.
Steps for VCA event recording
All of configuration is the same as manual recording but optionally, you have to set up 'Event
Recording' tab.
Step 1. Set the time of post‐alarm recording. Then, when VCA event is triggered, the images
will be recorded for the configured time only.
Step 2. Check the box of 'Enable automatic recording with VCA event triggering' to enable the
VCA event recording.
How to play back the recoding file on the webpage
1. Click the LIST button at the bottom of the page.
2. Then, you can see the new window is opened as below. The created directories are listed on
the web page.
3. Click one of the directories you want. Then, you can see the recording files are listed.
2010/2‐1 03A.00 59