Ganz H.264 Network Encoder Series User Manual page 81

GANZ Network camerab and encoder series
You can control the exposure
of camera by selecting 'auto'
or 'manual' to improve the
image quality.
Auto : It controls the
exposure automatically.
Manual : You can improve
the quality of image by
configuring the target value
of exposure. Higher figure
means better image quality.
The quality is optimized by
user's configuration of
shutter speed and AGC.
Event Configuration
Only Video, Motion Detection, VCA, Network, and Health are supported for the event
publisher (DI/DO are not supported). Refer to section 4.4. Event Configuration for the
explanation of the setting.
2010/2‐1 03A.00
Webpage User's Manual
You can slow the shutter
speed by setting target value.
This is used when it is too dark
and need to get more of light
by slowing the shutter speed.
‐Based on full 30 fps‐
1/2 : 15 fps (every 66ms)
1/4: 7.5 fps (every 133ms)
1/8 : 3.75 fps (every 266ms)
81