Ganz H.264 Network Encoder Series User Manual page 51

GANZ Network camerab and encoder series
rtsp:// rtsp server ipaddress : port / rtp session name
port : 554
e.g. rtsp://192.168.111.32:554/ch0_unicast_firststream
NAL unit option
The option of "Does not include NAL unit header (Only use in 'H.264')" is required only when
the codec is H.264. GANZ ENCODER AND NETWORK CAMERA supports both of non‐standard
H.264 and standard. The 'non‐standard' means the video stream packet includes the NAL unit
header additionally.
The factory default setting : Non standard format
So, if you want the standard format of H.264, you should tick this option.
For your information
•
NAL Stream: The stream consists of only NAL units (H.264 standard format)
•
Byte Stream: The sequence identifier, NAL header, is included between NAL streams
The data structure of byte stream
I SPS I PPS I IDR I P SLC
I : Sequence Identifier
SPS : Sequence Parameter Set
PPS : Picture Parameter Set
IDR : IDR Slice
P SLC : P slice
You can refer to the 'GANZ ENCODER AND NETWORK CAMERA media data manual' in the SDK
for more information about the video format of GANZ ENCODER AND NETWORK CAMERA
series.
RTSP Authentication
If you want to use the authentication process for getting the RTSP streaming from GANZ
ENCODER AND NETWORK CAMERA, you can choose one of the options.
Authentication type
Basic : It uses simple way of encryption of ID and PW with clear text
Digest : It uses more enhanced way of encryption.
Please refer to the http://www.faqs.org/rfcs/rfc2617.html for more information about the
authentication of clients using basic and digest.
Privilege
You can use one of the user groups for RTSP Authentication.
2010/2‐1 03A.00
... ...
I P SLC
Webpage User's Manual
I IDR I P SLC
... ...
51