Http Server On Ganz Gxi Devices - Ganz VCOUNT700RP Instruction Manual

PEOPLE COUNTING SYSTEM
In section "Action", activate only the HTTP option as in picture below, which will be
properly configured as explained in point 2.2:

2.2. HTTP Server on GANZ GXi devices

In order to activate data sending from VCA device to the VCOUNT700RP server, you
need to define the IP address of the VCOUNT700RP server in VCA device.
In " Address" field (menu 'SetupEvent ConfigurationHTTP'), please enter the IP
address of VCOUNT700RP unit (port number: 80). No logon information are requested.
Enable 'Append detailed information' for ZN-XE, ZN1, ZS1 series devices, as per below
snapshot on the right.
ZN-VE devices:
040515
CONFIGURATION - INSTR. MANUAL
ZN-XE, ZN1, ZS1 devices:
6