Table of Contents
Advertisement
Making an Intercom Call
Tone Call
You can choose between tone call (ringing sounds) and voice call (speaking). The system default is tone
call. You can switch tone call to voice call by dialing 1 during an intercom call. You can also program your
telephone to make an intercom voice call when only an extension number is dialed, or to make an intercom
tone call when 1 is dialed following an extension number.
1
2
1
2
3
4
5
6
7
8
9
0
Extension
Number (10-25)
Operator Call
If you want to call the operator, dial 0.
Speed Dial
An extension number can be assigned to a ONE-TOUCH key or an FF key.
On-Hook Dial
You can make a call without picking up the handset.
Press the ON/OFF key instead of picking up the handset.
Voice Call
You can choose between tone call (ringing sounds) and voice call (speaking). When making a voice call, a
splash tone, followed by your voice, is heard from the telephone receiving your call. You can switch voice
call to tone call by dialing 1 during an intercom call. You can also program your telephone to make an
intercom voice call when only an extension number is dialed, or to make an intercom tone call when 1 is
dialed following an extension number.
1
2
1
2
3
4
5
6
7
8
9
0
Extension
Number (10-25)
To Set to Tone Call
To set back to tone call, repeat the procedure.
3
3
4
1
During Intercom
Call
O-17
Making an Intercom Line Call
FF
FF
Advertisement
Chapters
Table of Contents
