Changing I/O Port Settings - Digital Equipment Digital Server 3220 Series System Reference Manual

Changing I/O Port Settings

The following list shows the settings that can be made to the I/O ports via the
Advanced section of the BIOS Setup utility.
•
PS/2 mouse
•
COM1
•
COM2
•
Parallel port
•
Parallel port mode
•
Floppy disk controller
•
Integrated PCI Ethernet
•
Integrated PCI SCSI
•
Integrated IDE controller
For more information on changing I/O port settings, refer to Appendix C, "BIOS
Setup Utility Features."
To change the I/O port settings:
1. Reboot the server
2. Press <F2> when the DIGITAL logo screen appears.
3. Select Advanced.
4. Select Integrated Peripherals.
5. Select the port(s) you wish to change.
6. Use the +/- keys to change values.
7. Press [Esc] then [Enter] twice to exit the BIOS Setup utility and to reboot the
server so changes immediately take effect.
Server Software and Utilities
2-7