Server Software and Utilities
Use the BIOS Setup utility to:
•
Set time and date
•
Change I/O port settings
•
Set security options
•
Change the boot sequence
•
Check system management parameters
The remainder of this section explains how to run the BIOS Setup utility, maneuver
through the options, and perform specific tasks.
Accessing the BIOS Setup Utility
To access the BIOS Setup utility:
1. Turn on your server and allow the Power-On Self Test (POST) to complete.
2. Make a note of any configuration errors listed, and then press [F2] to display
the Main menu.
3. Follow the instructions on your monitor screen and any on-line help pop-up
screens to configure your server.
2-4