Server Software and Utilities
ServerWORKS Quick Launch
ServerWORKS Quick Launch is used to install the server's Network Operating
System (NOS). In addition to providing quick and seamless NOS installation, Quick
Launch also provides device drivers, documentation, and the ability to make diskettes
of utilities such as diagnostics. For more information, refer to the Quick Launch
Getting Started guide.
BIOS Setup Utility
The BIOS Setup utility enables you to select and store information about your
server's hardware and software in the battery-backed memory of the CMOS RAM.
This information takes effect each time the server boots and can be changed any
time you run setup.
You should use the BIOS Setup utility each time you need to reconfigure or expand
your server.
The following is an example of a BIOS Setup utility screen.
2-2
CAUTION:
Your server was setup for normal operation at
the factory and will operate properly without additional
configuring.
It is important for you to read carefully and understand this
section before attempting to modify your server's factory
settings. Changing some settings might cause your server
to operate improperly.