Tape Drive Configuration Guidelines - Digital Equipment Digital Server 3220 Series System Reference Manual

Tape Drive Configuration Guidelines

•
Tape drives should be installed in the 5¼-inch drive bays.
•
A full-height tape drive occupies two half-height 5¼-inch drive bays.
•
Termination must be removed from SCSI tape devices. Termination is
provided by the SCSI adapter and the cable.
•
You must manually set the SCSI ID on tape drive(s). Refer to your
manufacturer's documentation for information on setting drive IDs.
•
Use the SCSI Configuration utility to configure tape drive(s).
SCSI Device Configurations
7-3