Installing A Half-Height 5¼-Inch Device Into The Front Access Drive Bay - Digital Equipment Digital Server 3220 Series System Reference Manual

Installing Storage Devices (DIGITAL Server 3220R)
Installing a Half-Height 5¼-Inch Device into the Front Access
Drive Bay
To install a half-height 5¼-inch device into one of the front access drive bay slots,
perform the following:
1. Turn off your server.
2. Remove the front bezel.
3. Remove the screws securing the server to the rack and then slide it out.
4. Remove the screw securing the top cover to the server.
5. Remove the top cover.
6. Disconnect the power and data cables from the diskette drive.
7. Remove the screw securing the diskette drive to the chassis and then
remove the drive (see Figure 9-1).
9-2