Installing The Processor Module - Digital Equipment Digital Server 3220 Series System Reference Manual

Processor Upgrades

Installing the Processor Module

1. If you are changing processor speeds, set all appropriate switch settings on
the processor module. Otherwise, current switch settings apply.
Refer to Appendix A, "Technical Specifications," for switch locations.
If you are installing additional memory as part of this procedure, refer to
2.
Chapter 6, "Installing Additional Memory," for more information.
3. Install the processor module.
4. Install the retainer and then tighten the thumbscrew (A, Figure 5-4).
5. Replace the side panel or top cover.
Refer to Chapter 3, "Server Components," for more information.
Connect all external devices and restore power. Afterwards, your server
6.
automatically recognizes both processors.
5-6