Table of Contents
Advertisement
Flash BIOS Troubleshooting
Problem
Cannot flash the server's
BIOS
Possible Cause
Main logic board switch
settings incorrectly set.
BIOS Setup utility switch
setting incorrectly set.
Troubleshooting
Action
Make sure main logic board switch
SW1-2 "Recovery Mode" is set to
Recovery and SW1-1 "BIOS
Protection" is set to Normal. Refer to
Appendix A for switch locations.
Make sure the "System BIOS Flash"
option in the BIOS Setup utility is set
to Enabled. Refer to Chapter 2 for
more information.
13-19
Advertisement
Table of Contents
Troubleshooting
