Hot Swap Drive Configuration Guidelines - Digital Equipment Digital Server 3220 Series System Reference Manual

SCSI Device Configurations

Hot Swap Drive Configuration Guidelines

•
A maximum of four hot swap drives can be installed and configured in the
server.
•
Hot swap drives must only be installed in the hot swap drive bay.
•
SCSI ID addressing is fixed on the storage backplane as ID 0, 1, 2, and 3
from top to bottom. See Figures 7-1 and 7-2 for SCSI ID assignments and
slot locations.
•
All hot swap drives in model 3220R require drive carriers.
SCSI IDs (Model 3220)
Switch Position Setting
Top switch, (SW1-1) OFF
Top switch, ON
Bottom switch (SW1-2)
7-4
0 1
8 9
No connection
SCSI ID
2 3
10 11