Installing Expansion Boards - Digital Equipment Digital Server 3220 Series System Reference Manual

Installing Expansion Boards

The following procedure describes how to install ISA and PCI expansion boards.
1. Turn off your server.
2. Remove the appropriate access panel.
3. Unscrew and remove the metal filler plate from the desired PCI or ISA
expansion slot.
4. Discard the filler plate, but retain the screw.
NOTE:
Read and fully understand your optional expansion
board's documentation before installing it.
Figure 10-2. Removing a Metal Filler Plate
Installing Expansion Boards
DEC01626-2
10-9