Scsi Configuration Utility - Digital Equipment Digital Server 3220 Series System Reference Manual

SCSI Configuration Utility

Your DIGITAL Server comes with an onboard, dual channel SYMBIOS 896 SCSI
controller and a SCSI Configuration utility. This utility, located within the server BIOS,
allows you to change SCSI controller settings without opening the server.
Use the SCSI Configuration Utility to:
•
Check global factory default settings for each SCSI channel and devices
connected to it.
•
Change factory default settings for individual SCSI devices.
•
Change the device boot order.
To start the SCSI Configuration utility:
Press [Ctrl] + [C] when the following message appears during the boot process:
Press Ctrl-C to start Symbios Configuration Utility...
This message stays on the screen for about five seconds. If you invoke the
Configuration utility, the Main Menu of the Symbios SCSI Configuration utility is
displayed.
Main Menu
SYM53C896
SYM53C896
Change Adapter Status
Adapter Boot Order
Additional Adapter Configuration
Display Mode = Verbose
Mono/Color
Language
Help
Quit
Port IRQ---------Status-------------NVRAM
Num Level
9000 9
9400 9
Current Next-Boot
On On
On On
Server Software and Utilities
Found
Yes
Yes
DEC01598
2-17