Connecting Scsi And Raid Devices; Introduction; Scsi Cable Configurations; Wide Ultra Scsi Cable Configuration - Digital Equipment Digital Server 3220 Series System Reference Manual

Connecting SCSI and RAID Devices

Introduction

This chapter contains the cabling configurations that must be followed when
connecting SCSI and RAID devices.
Refer to Chapter 7, "SCSI Device Configurations," for detailed information on
SCSI configuration guidelines.

SCSI Cable Configurations

The following sections describe the available SCSI cable configurations for your
DIGITAL Server.

Wide Ultra SCSI Cable Configuration

To connect wide Ultra SCSI devices, perform the following:
1. Power down the server.
2. Disconnect all peripheral devices from the server.
3. Remove the access panel(s).
4. Connect the cables as shown in Figure 11-1.
Use the nylon cable clamps to dress the cables properly. Do not block the
air flow from the fan.
11
11
11-1