Regulatory Compliance Statements - Digital Equipment Digital Server 3220 Series System Reference Manual

Regulatory Compliance Statements

The following statements of compliance are required by the respective governmental
regulatory agencies.
DIGITAL Server 3220R (Rackmount Model)
FCC Notice — U.S.A.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case, the user will be required to correct the interference at his
own expense.
CSA — Canada
This digital apparatus does not exceed the Class A limits for radio noise emissions
established in the radio interference regulations of the Canadian Department of
Communications.
VCCI — Japan
This equipment is in the Class I category (information equipment to be used in
commercial and/or industrial areas) and conforms to the standards set by the
Voluntary Control Council for Interference (VCCI) by Data Processing Equipment and
Electronic Office Machines aimed at preventing radio interference in commercial
and/or industrial areas.
Consequently, when used in a residential area or in an adjacent area thereto, radio
interference may be caused to radio and TV receivers, etc.
Read the instructions for correct handling.
CAUTION: Any changes or modifications to this device, which
are not identified in this manual, could cause harmful
interference and void the user's authority to operate this device.