Checking System Management Parameters; Bios Upgrade Utility - Digital Equipment Digital Server 3220 Series System Reference Manual

Checking System Management Parameters

These screens allow you to see an overview of your server's system and
environment parameters, and details of the system assets (environment, memory,
POST system, processor module, main logic board, and PCI IRQ assignment). To
manage the system:
1. Reboot the server and press <F3> when the DIGITAL logo screen appears.
2. The "Summary" menu appears. Use the [←] and [→] arrows to select the
parameter you want to view or change.
3. In screens that are editable, use the [↑] and [↓] arrows to select the field you
want to change. Enter the new parameter(s) and then press [Enter] to
accept the changes.
4. Press [Esc] then [Enter] to exit system management and reboot the server
so changes immediately take effect.

BIOS Upgrade Utility

All servers have BIOS software in a flash (ROM) chip located on the main logic
board. This BIOS initializes hardware and boots the operating system when the
server is turned on. The BIOS also provides access to other services such as a
keyboard and disk drives.
You can upgrade your server's BIOS to future releases by executing the BIOS
upgrade utility (PHLASH.EXE) located in the BIOS upgrade kit. PHLASH.EXE and
BIOS upgrades are available on the Internet.
Server Software and Utilities
2-15