Support Information - Digital Equipment Digital Server 3220 Series System Reference Manual

Preface

Support Information

A variety of support information is available to help you set up, configure, and operate
your DIGITAL Server. This information comes in the form of README information,
on-line help, electronic books, or as printed material.
If you want to...
Set up your server
Load the supplied ServerWORKS Quick
Launch software
Locate the major internal components of
your server
Check the fault status of the server
Upgrade and configure your server after
installing optional components (for
example, a processor module, memory,
mass storage devices, SCSI or RAID
adapters, etc.)
Run diagnostics
xii
Refer to the...
Installation Guide to unpack, install internal
components, connect external devices and power,
and access the ServerWORKS Quick Launch
program.
ServerWORKS Quick Launch Getting Started guide.
README information contained on the
ServerWORKS Quick Launch CD-ROM discs.
Quick Reference label on the side panel of the
DIGITAL Server 3220 or the top cover of the DIGITAL
Server 3220R.
Fault status LED codes label located on your server's
front panel.
Information supplied in this System Reference .
Supplied SCSI, RAID, and other options
documentation. These are supplied as either printed
manuals or as electronic books on the Quick Launch
CD-ROM discs.
ServerWORKS Quick Launch Getting Started guide
and the Quick Launch program on the supplied CD-
ROM discs.
Supplied diagnostics documentation which is on the
Quick Launch CD-ROM discs.