Removing And Replacing The Airflow Guide; Desktop Models; Minitower Models - HP Vectra VE6 8 Supplementary Manual

Removing the Airflow
Guide
Replacing the Airflow
Guide

Removing and Replacing the Airflow Guide

Removing and Replacing the Airflow Guide

Desktop Models

1 Remove the screw that connects the airflow guide to the video card.
2 Slide the airflow guide away from the power supply unit and, at the same
time, lift the airflow guide clear of the video card.
Step 1
Step 2
3 Place the airflow guide on a desk/table top.
1 Slide the airflow guide towards the power supply unit, making sure that
the guide passes below the key lock.
2 Insert the two tabs on the airflow guide into the power supply unit.
3 Using the screw that you removed earlier, secure the airflow guide to the
video card.

Minitower Models

The airflow guide is attached to the underneath of the power supply unit.
When you remove the power supply unit, you also remove the airflow guide.
Refer to page 18 for information about removing the power supply unit.
16
Slide the airflow guide under
the key lock (if one is fitted)