Removing And Replacing The Airflow Guide; Removing The Airflow Guide; Replacing The Airflow Guide - HP Vectra VE 6/xxx - 8 Maintenance Manual

Removing and Replacing the Airflow Guide

To improve access to the system board, you may need to temporarily
remove the airflow guide.

Removing the Airflow Guide

1 Remove the screw that connects the airflow guide to the video card.
2 Slide the airflow guide away from the power supply unit and, at the
same time, lift the airflow guide clear of the video card.
Step 1
Step 2
3 Place the airflow guide on a desk/table top.

Replacing the Airflow Guide

1 Slide the airflow guide towards the power supply unit, making sure
that the guide passes beneath the key lock.
2 Insert the two tabs on the airflow guide into the power supply unit.
3 Using the screw that you removed earlier, secure the airflow guide to
the video card.
1 How to Install Accessories in Your Desktop PC
Removing and Replacing the Airflow Guide
Slide the airflow guide under
the key lock (if one is fitted)
English 5