Removing And Replacing The Airflow Guide - HP Kayak XU800 Installing And Replacing Hardware Manual

Removing the HP
UltraFlow Airflow
Guide
Replacing the HP
UltraFlow Airflow
Guide

Removing and Replacing the Airflow Guide

1 Switch off the display and PC Workstation. Disconnect all power cables
and any LAN or telecommunications cables.
2 Remove the PC Workstation's cover (refer to page 3).
3 Grasp the handle on top of the HP UltraFlow Airflow Guide, then slide it
out of the PC Workstation.
4 Lift the HP UltraFlow Airflow Guide upwards to remove it from the PC
Workstation's case.
1 Slide the HP UltraFlow Airflow Guide onto the processor fan housing
until it clicks into place.
2 Replace the PC Workstation's cover (refer to page 4). Reconnect all the
power and telecommunications cables.
Installing and Replacing Hardware Parts in Your PC Workstation
Removing and Replacing the Airflow Guide
5