Installing a 2.5 inch hard disk drive
1.
Fasten four mounting screws with grommets onto the new 2.5 inch hard drive.
2.
Position the hard drive above the drive cage with the connectors facing the power and data cables.
3.
Connect the power and data cables to the hard drive (1).
4.
Place the hard drive into the drive cage and slide it firmly away from the edge of the computer (2) until
the hard drive snaps into place.
Be sure that the hard drive latch has moved back into place to cover the grommet on the side of the hard
drive.
5.
Install the access panel.
For instructions, see
40
Chapter 3 Hardware repair and upgrade
Replacing the computer access panel on page
29.