Front I/O And Usb Panel Housing Assembly - HP Pro 3400 Maintenance And Service Manual

Front I/O and USB Panel Housing Assembly

Description
Front I/O and USB assembly without card reader
Front I/O and USB assembly with card reader
1. Prepare the computer for disassembly
2. Remove the access panel
3. Lay the computer on its side with the front facing toward you.
4. Remove the front bezel
5. Remove the cables from the metal clip built into the bottom of the chassis, and then unplug the
three cables that connect the assembly to the system board. The assembly cables connect to
the following system board connectors:
HP Pro 3400/3410
models
F_AUDIO – yellow
connector
F_USB2 – white
connector
F_USB3 – white
connector
72 Chapter 7 Removal and Replacement Procedures – Microtower Chassis
(Preparation for Disassembly on page
(Access Panel on page
(Front Bezel on page
HP Pro 3405 HP Pro 3500
models models
F_AUDIO – yellow F_AUDIO – yellow
connector connector
F_USB1 – white F_USB1 – white
connector connector
F_USB4 – white F_USB2 – white
connector connector
50)
51).
HP Pro 3505
models
F_AUDIO – yellow
connector
F_USB2 – white
connector
SPDIF_OUT1 –
white connector
Spare part number
667853-001
667852-001
49).
HP Pro 3515
models
F_AUDIO – yellow
connector
F_USB2 – white
connector
F_USB30_1 – blue
connector