System; General - Syscom Video Direct IP Operation Manual

General

 Language: Choose the language to be used during remote setup.
 Name: Enter the camera name (up to 31 characters including spaces).
 Note: Enter additional information about the camera.
 HW Version, SW Version: These fields display the camera's hardware and software versions.
 Miscellaneous:
− ONVIF Protocol: Check the box to enable the ONVIF protocol. The ONVIF protocol is available
only for users belonging to the default user groups (Administrator, Operator, User).
 Setup:
− Load Default Setup...: Click to return all settings except date/time to the original factory
settings. You can select whether or not network settings will be included when the setup is
applied. Refer to the Network setup for details of the network settings.
− Import Setup...: Click to apply the settings saved as a .dat file format to the camera. A setup
screen appears allowing you to select the setup file. You can select whether or not to include
network settings (except FEN setting) when the setup is applied. Refer to the Network
setup for details of the network settings.

System

You can change a camera's system information, import or export all
settings, and add users or groups.
Network Camera
11