Event Action; Alarm Out - Syscom Video Direct IP Operation Manual

Network camera

Hide thumbs Also See for Direct IP:

Table of Contents

Check the Alarm Out box to activate alarm out. The alarm out is associated with PIR sensor

(Passive Infrared).

 Dwell Time: Select the alarm-out dwell time. An alarm out is activated for the preset dwell

time after detecting an event.

 Schedule: Set up the period to enable alarm out. An alarm out can be activated only during

this period.

NOTE: This is supported for the alarm supported model only. The PIR (Passive Infrared) sensor

in the upper middle of IR LEDs detects motions by detecting infrared radiation changes at night

or under low lighting conditions. The motion detection by the PIR sensor activates alarm out

according to the settings of Alarm Out, and the white LEDs which are at the left and right middle

of IR LEDs are lit while the alarm out is activated.

Event Action

You can set up event actions to be taken when the camera detects events.

Network Camera

Table of Contents

Do you have a question about the Direct IP and is the answer not in the manual?