User/Group - Syscom Video Direct IP Operation Manual

User/Group

 User/Group: Click the buttons to change the settings for a group or a user allowed controlling
the camera remotely.
− Add Group: Click to add a group. Enter the group name and set authority levels for the group
to control the camera remotely.
− Add User: Click to add a user. Enter the user name and select the group that the user will
belong to. Enter the password to be assigned to the user.
− Edit: Select a group and click the button to change authority levels assigned to the group, or
select a user and click the button to change the user's password.
− Remove: Select a group or user and click the button to delete the group or user.
 Allow Anonymous Login: Check the box to use the webcasting feature. Refer to the Video –
Webcasting setup for details.
 Allow Anonymous PTZ Control: Check the box to allow controlling zoom of the lens remotely
on a website by using the webcasting feature.
NOTES:
 Only users belonging to the Administrator group can make User/Group changes.
 There is no default password for the admin user in the Administrator group.
 The default groups (Administrator, Operator, User) cannot be edited or deleted. The same
authority levels are assigned to the user groups in the ONVIF protocol.
 The authority levels that can be assigned are:
– Upgrade: The user can upgrade the software.
– Setup: The user can set up the system.
– Color Control: The user can control brightness, contrast, hue and saturation for cameras.
Network Camera
13