Syscom Video Direct IP Operation Manual page 30

Operation Manual
Day & Night: Click the tab to set up day & night settings.
 B&W Mode: When in the black and white mode, images are displayed in black and white and
are clearer in low light conditions.
− Off, On: Disables or enables the black and white mode.
− Auto: Disables or enables the black and white mode automatically based on the conditions
where the camera is installed.
− Schedule: Sets up the black and white mode schedule. The black and white mode is enabled
during the date and time scheduled as Nighttime and disabled during the rest. Set up or release
Nighttime by selecting On or Off in the bottom and clicking or dragging the date and time
area in the table. Selecting On or Off and clicking the Select All/Clear All button sets up
or releases Nighttime for all dates and time.
24