Ieee 802.1X - Syscom Video Direct IP Operation Manual

Network camera

Hide thumbs Also See for Direct IP:

Table of Contents

Operation Manual

IEEE 802.1X

Check the IEEE 802.1X box to use the IEEE 802.1X network connection authentication function.

 Certificates: Uploads a certificate or private key for network connection depending on the

authentication type. Entering a private key password might be required depending on the

authentication type.

 Settings: Sets up EAP (Extensible Authentication Protocol).

− EAP Type: Select the type of authentication to be used for network connection authentication.

The authentication type must be identical to the authentication type that the authentication

server uses.

− EAPOL Version: Select the EAP version.

− EAP Identity, EAP Password: Enter the ID and password for the authentication.

NOTE: For the IEEE 802.1X network connection authentication function to work properly, the

authentication server and AP should support the IEEE 802.1X authentication.

Table of Contents

Do you have a question about the Direct IP and is the answer not in the manual?