Date/Time - Syscom Video Direct IP Operation Manual

Network camera

Hide thumbs Also See for Direct IP:

Table of Contents

Operation Manual

− Export Setup...: Click to save the current camera settings as a .dat file format. A setup screen

appears allowing you to name the setup file.

NOTES:

 The Load Default Setup and Import Setup functions are permitted only to the users in the

Administrator group.

 Do NOT check the Include Network Setup box when the network settings of the setup file are

used in another camera. Otherwise, the connection to the camera might not be made properly.

 If the IP address, admin port number or SSL settings are changed during Setup, Remote Setup

closes after saving the changes.

Date/Time

 Date/Time: Change the system date/time, date/time format and time zone. Turn daylight-saving

time on or off by checking the box. Clicking the Apply button applies the changes immediately.

 Time Sync

− Automatic Sync: Check the box to automatically synchronize the time with a time server. Enter

the IP address or the domain name of the time server and set the time interval for synchronization.

If the time server uses the FEN function, selecting the Use FEN box allows you to enter the

name instead of the IP address or the domain name of the time server.

− Run as Server: Check the box to run the camera as a time server.

NOTE: If you want to use a domain name instead of the IP address of the time server, the DNS

server must be set up properly when setting Network – IP Address setup. If you want to use a

name instead of the IP address or the domain name of the time server, the FEN function must

be set up properly when setting the Network – FEN setup.

Table of Contents

Do you have a question about the Direct IP and is the answer not in the manual?