Syscom Video Direct IP Operation Manual page 50

Network camera

Hide thumbs Also See for Direct IP:

Table of Contents

Operation Manual

NOTES:

 There might be a problem with the bottom of the WebGuard page being cropped caused by

the address or status bars. In this situation, it is recommended that websites open windows

without address or status bars by changing Internet setting. (Go to Tools, and Internet Options,

and then the Security tab → Click the Custom level... button → Select Enable for the Allow

websites to open windows without address or status bars option.)

 When running WebGuard in the Microsoft

recommended that you start Internet Explorer with elevated administrator permissions. Click

the right mouse button on the Internet Explorer icon and select the Run as administrator option

from the context menu. Otherwise, some functions of WebGuard might be limited.

 There might be a problem with screen display or screen update caused by low image transmission

speed when using the Microsoft

it is recommended that you disable the Auto Tuning capability of your computer. Run the

Command Prompt with elevated administrator permissions (Go to the Start Menu, and

Accessories, and then Command Prompt → Click the right mouse button and select the Run

as administrator option). Then enter "netsh int tcp set global autotuninglevel=disable" and

press the enter key. Restart your computer to apply the changes. If you want to enable the

Auto Tuning capability again, enter "netsh int tcp set global autotuninglevel=normal" after running

the Command Prompt with elevated administrator permissions. Restart your computer to

apply the changes.

 When running the updated WebGuard for the first time, Internet Explorer might occasionally

load the information from the previous version. In this case, delete the temporary Internet

files by selecting Tools → Internet Options → General tab, and then run WebGuard again.

 You will need to get the appropriate IP address for the camera you want to connect to and

the WebGuard port number from your network administrator.

Windows

Vista or later operating system. In this situation,

Vista or later operating system, it is

Table of Contents

Need help?

Do you have a question about the Direct IP and is the answer not in the manual?