Fen - Syscom Video Direct IP Operation Manual

 DNS Server: Enter the IP address of the DNS server. If you set up the DNS server, the domain
name of the server can be used instead of the IP address during the FEN, time or SMTP server
setup. Ask your Internet service provider for the IP Address of the DNS Server. When the camera
is networked via DHCP, selecting From DHCP automatically assigns the IP address of the DNS
server. The assigned IP address is displayed the next time it is connected.
NOTES:
 Ask your network provider for details about the network connection type and connection
information for the camera or the IP address of the DNS server.
 If the camera is configured for a DHCP or ADSL network, it is best to use the FEN function
because the camera IP address might change frequently.

FEN

Check the Use FEN box to use the FEN function.
 FEN Server: Enter the IP address or domain name of the FEN server.
 Port: Set up the port number of the FEN server.
 Use NAT: Check the box when the camera uses a NAT (Network Address Translation) device
for network connection.
 Camera Name: Enter the camera name to be registered on the FEN server. Check whether or
not the name is available by clicking the Check button.
 Help Desk: Choosing the OK button registers the camera on the FEN server. Proper FEN
settings will display the help desk information of the FEN server.
Network Camera
15