Syscom Video Direct IP Operation Manual page 51

① Log Out: Click
② Version: Position the mouse pointer on the logo to see the WebGuard program version.
③ Date/Time: It displays the current date and time.
④ Full Display: Click
keyboard returns to the previous screen.
⑤ Print: Click
⑥ Save Image: Click
⑦ Setup: Click
speed by changing the image drawing mode, and select OSD information to be displayed on
the screen.
⑧ Remote Setup: Click
screen.
⑨ Login Information: It displays the login information of WebGuard.
⑩ Camera Button: The button displays the camera number.
⑪ Zoom Control: It allows you to control zoom remotely. Other functions are not supported.
⑫ Image Adjustment: It allows you to adjust the quality of monitored image.
⑬ Alarm-Out Control: It allows you to control an alarm out device remotely (alarm supported
model only).
⑭ Event Status Window: The event status window at the bottom displays a list of events that
were detected in the camera.
to log out of the WebGuard program.
to display the video in full screen. Pressing the Esc button on a
to print the current image on a printer connected to your computer.
to save the current image as a bitmap or JPEG file format.
to set up the image drawing mode and OSD display. You can adjust the display
to change the settings of the camera by using the Remote Setup
Network Camera
45