Subscribe to Our Youtube Channel
Related Manuals for Syscom Video HCBN1000
Summary of Contents for Syscom Video HCBN1000
- Page 1 14-11-27 50303807 M.J.KWON HCBN1000 Mega Analogue Box camera Instruction Manual 1.3Mega 1/3" CMOS High Resolution HDB-N15DNB8/HCBN1000/SyscomVideo 50303807 강영구 14-11-27 M.J.KWON 14-11-27 14-11-27 14-11-27...
- Page 2 HCBN1000 Mega Analogue Box camera Instruction Manual 1.3Mega 1/3" CMOS High Resolution...
-
Page 3: Fcc Compliance Statement
FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC INFORMATION : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. . Do not block any ventilat ion openings. Install in accord ance with the manufacturer`s instructions. 6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. -
Page 5: Table Of Contents
TABLE OF CONTENTS CONTENTS OF PACKAGE INTRODUCTION CAMERA OVERVIEW MENU MAP CONTROL AND CONNECTIONS DAY&NIGHT I/O TERMINALS LENS SPECIFICATIONS CONTENTS OF PACKAGE Installation of the camera must be performed by qualified service personnel in accordance with all local and national electrical and mechanical codes. Carefully remove the color camera and its accessories from the carton and verify that they were not damaged in shipment. -
Page 6: Introduction
1/3" 1.3M 1/3" 0.1 lux(BW) Auto and manual white balance modes (ATW/AWC/Manual/AWB) Day & Night (ICR) :Auto / Color / BW / EXT RS 485 Operates in DC12, AC24V ± 10%... -
Page 7: Camera Overview
(Option) (Option) AC Power Cord AC 100-240V... -
Page 8: Menu Map
BACKLIGHT WHITE BAL SENS-UP D-WDR RESET <BACKLIGHT> <WHITE BAL> <DAY&NIGHT> AWC->SET INDOOR HSBLC OUTDOOR MANUAL <RESET> SHARPNESS CAM TITLE FACTORY RS485 RETURN MONITOR D-EFFECT DEFECT DET CVBS CROP VIDEO OUT D-ZOOM LANGUAGE SMART D-ZOOM VERSION RETURN RETURN... - Page 9 MAIN MANU MAIN MANU LENS LENS MANUAL EXPOSURE EXPOSURE BACK LIGHT BACK LIGHT WHITE BAL WHITE BAL DAY&NIGHT AUTO DAY&NIGHT AUTO IMAGE IMAGE FUNCTION FUNCTION SYSTEM SYSTEM RESET RESET EXIT EXIT AGC, SENS-UP, BRIGHTNESS, D-WDR and DEFOG function of the camera. 1/50000, x2 ~ x30 Adjust the Auto Gain Control level.
- Page 10 BACKLIGHT The BACKLIGHT menu is used to the ability to expand the dynamic range and to prevent back lighting from the image. 1)WDR Select the Dynamic Range level. * When WDR is ON, D-WDR, D-ZOOM, SMART D-ZOOM and DIS function can not turn on. 2)BLC Prevents such a back light effect to secure a clear image under All illumination environments.
-
Page 11: White Balance
WHITE BALANCE The screen color can be adjusted by using the Auto White Balance function. It compensates for deviations in the white color caused by changes in the color temperature of the light source so that the colors are reproduced correctly. 1)ATW Automatically adjust color temperature. - Page 12 DAY&NIGHT mode are changed according to the brightness of the image. Use only when the camera is installed in a dark place but the camera is viewing a bright place. When used in a normal installation, hunting may occur. BURST ON, OFF IR SMART LEVEL 1~15...
- Page 13 The IMAGE menu provides the ability to adjust the SHARPNESS, LSC, D-EFFECT, DIS, D-ZOOM and SMART D-ZOOM functions of the camera. Adjust the SHARPNESS level. ▶ 0 - 15 1) SHARPNESS Select the lens Lens Shading Compensation. ▶ ON, OFF 2) LSC Select real or still mode ▶...
- Page 14 1) DNR Select Digital Noise Reduction. ▶ ON, OFF ▶ ON, OFF ▶ ON, OFF (Sensitivity 0 - 100) SMART NR Adjust the 3DNR level ▶ 0 - 100 LEVEL Detects the Motioned Object in the image. ▶ ON, OFF 2) MOTION Select the Motion area ▶...
- Page 15 <FUNCTION> MAIN MANU FUNCTION LENS EXPOSURE MOTION BACK LIGHT PRIVACY WHITE BAL DEFECT DET DAY&NIGHT AUTO RETURN IMAGE FUNCTION SYSTEM RESET EXIT <DNR> RETURN <MOTION> MOTION FUNCTION SELECT AREA1 DISPLAY MOTION SENSITIVITY |▪▪▪▪▪| 60 PRIVACY MOTION VIEW DEFECT DET DEFAULT RETURN RETURN <...
- Page 16 SYSTEM The IMAGE menu provides the ability to adjust the CAM TITLE, RS485, MONITOR, CVBS CROP, VIDEO OUT, LANGUAGE and, VERSION functions of the camera. 1) CAM TITLE Maximum of 15 characters are allowed. 2) RS485 Select the CAMERA ID ▶ 0 ~ 255 CAM ID Select the CAMERA ID position ▶...
- Page 17 < DISPLAY > SYSTEM CAM TITLE GAMMA AUTO MONITOR ADAPT.LEVEL |▪▪▪▪▪| 100 CVBS CROP BLUE GAIN |▪▪|▪▪| 64 VIDEO OUT NTSC RED GAIN |▪▪|▪▪| 66 LANGUAGE ENGLISH RETURN VERSION RETURN ▪▪ ▪▪ BLACK LEVEL | | | + BLUE GAIN |▪▪|▪▪| +0 RED GAIN |▪▪|▪▪| +0...
-
Page 18: Control And Connections Day&Night I/O Terminals
CONTROL AND CONNECTIONS/DAY&NIGHT IN/ALARM OUT TERMINALS 1. Terminal Block (Option) 1-1. DAY&NIGHT EXTERNAL INPUT (1pin) Switches the cameras D/N mode to either Day or Night based on the input status. Refer to the diagram below. The cameras D/N mode must be set to EXT for this to function. (GND) Open contact: DAY Close contact: NIGHT... -
Page 19: Lens
LENS INSTALLING AUTO IRIS LENS... -
Page 20: Specifications
SPECIFICATIONS Dual Voltage Free Voltage AC24V / DC12V ± 10% AC 100 ~ 240V ~50Hz ± 10% MAX 3.4 Watts (310mA) MAX 4.5 Watts (60mA) 1/3" 1.3M Sony CMOS 1312(H) x 1069(V) 1296(H) x 1041(V) 1000 TVL 1.0 lux(COLOR), 0.1 lux(BW) NTSC / PAL Changed by OSD OSD (Tact Switch, Coaxial communication) OFF / WDR / BLC / HSBLC... - Page 21 PRINTED IN KOREA 50303807B...
Need help?
Do you have a question about the HCBN1000 and is the answer not in the manual?
Questions and answers