Network; Ip Address - Syscom Video Direct IP Operation Manual

Operation Manual
– Alarm-Out Control: The user can reset the output during an alarm (alarm supported model
only).
– PTZ Control: The user can control zoom of the lens.
– System Check: The user can view and check the remote system status.

IP Address

 Type: Select the type of network configuration. Remote Setup closes after saving the changes.
− Manual: Select when the camera is using a static IP address for network connection, and set
up LAN parameters manually.
− DHCP: Select when the camera is networked via DHCP (Dynamic Host Configuration Protocol).
Click the OK button, and a temporary IP address is automatically assigned to the camera. The
camera periodically will be issued a new IP address automatically.
− ADSL: Select when the camera is networked via ADSL. Enter the ID and password for ADSL
connection, and click the OK button. A temporary IP address is automatically assigned to the
camera. The camera periodically will be issued a new IP address automatically.
14

Network

You can change the network settings, set up the FEN and security
functions and control the network bandwidth.