Purpose Of The Frequency Inverters; Transport And Storage; Handling And Installation - BONFIGLIOLI Active ACT 201-05 Brief Manual

1.2
Warning! The frequency inverters are electrical drive components intended for
1.3
The frequency inverters must be transported and stored in an appropriate way.
During transport and storage the devices must remain in their original packaging.
The units may only be stored in dry rooms which are protected against dust and
moisture and are exposed to small temperature deviations only. Observe the climatic
conditions according to EN 50178 and the marking on the packaging. The units must
not be stored for more than one year without connecting them to the rated mains
voltage.
1.4
Warning! Damaged or destroyed components must not be put into operation
The frequency inverters are to be used in accordance with the documentation as well
as the applicable directives and standards. They must be handled carefully and
protected against mechanical stress. Do not bend any components or change the
isolating distances. Do not touch electronic components or contacts. The devices are
equipped with components which are sensitive to electrostatic energy and can easily
be damaged if handled improperly. Any use of damaged or destroyed components
shall be considered as a non-compliance with the applicable standards. Do not
remove any warning signs from the device.
06/05
06/05

Purpose of the Frequency Inverters

installation in industrial plants or machines. Commissioning and start of
operation is not allowed until it has been verified that the machine meets
the requirements of the EC Machinery Directive 98/37/EEC and
EN 60204. In accordance with the CE marking requirements, the
frequency inverters comply with the Low Voltage Directive 72/23/EEC as
well as EN 50178 / DIN VDE 0160 and EN 61800-2. The user shall be
responsible for making sure that the requirements of the EMC Directive
89/336/EEC are met. Frequency inverters are only available at specialized
dealers and are exclusively intended for professional use as per EN
61000-3-2.
The frequency inverters are also marked with the UL label according to
UL508c, which proves that they also meet the requirements of the CSA
Standard C22.2-No. 14-95.
The technical data, connection specifications and information on ambient
conditions are indicated on the name plate and in the documentation and
must be complied with in any case. Anyone involved in any kind of work
at the device must have read the instructions carefully and understood
them before starting the work.

Transport and Storage

Handling and Installation

because they may be a health hazard.
5
5