Rebooting The Csacs 1120 From A Serial Console; Determining The Status Of Csacs 1120 System And Services From A Serial Console - Cisco 1120 Installation Manual

Chapter 4 Administering the Cisco 1120 Secure Access Control Server

Rebooting the CSACS 1120 from a Serial Console

To reboot the CSACS 1120 from the serial console:
Log in to the CSACS 1120. For more information, see
Step 1
Console.
At the system prompt, enter
Step 2
At the
Step 3
Result: The CSACS 1120 reboots. When the reboot is finished, the
Determining the Status of CSACS 1120 System and Services from a
Serial Console
You can use the serial console connection to obtain system and service status information.
You typically perform status determination in the CSACS 1120 web interface. For more information, see
Note
"Determining the Status of Cisco Secure ACS Services" in the User Guide for Cisco Secure Access
Control Server 4.2.
To determine the status of the CSACS 1120 and it's services:
Log in to the CSACS 1120. For more information, see
Step 1
Console.
At the system prompt, enter
Step 2
Result: The console displays:
Name
Version
Appliance Management Software Version
Appliance Base Image Version
CSA build XXXX: (Patch: x_x_x_xxx)
Session Timeout (in minutes)
Last Reboot Time
Current Date & Time
Time Zone
NTP Server(s)
CPU Load (percentage)
Free Disk (amount of hard drive space available)
Free Physical Memory
Appliance IP Configuration
ACS Services (running/stopped)
OL-19455-01
reboot
Are you sure you want to reboot? (Y/N):
show
DHCP Enabled (Yes/No)
IP Address
Subnet Mask
Default Gateway
DNS Servers
CSAdmin
CSAgent
CSAuth
Logging In to the CSACS 1120 from a Serial
, and press Enter.
prompt, enter
Logging In to the CSACS 1120 from a Serial
, and press Enter.
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
Basic Command Line Administration Tasks
for yes, and press Enter.
Y
prompt appears.
login
4-3