Table of Contents
Advertisement
Temporarily stopping automatic printing
Occasionally, users may want to work uninterrupted for some time to finish a
large number of copy jobs. An example of such users are operators in a central
repro department or copy shop.
In this type of situation you can temporarily stop automatic printing. Print jobs
are queued and will not be printed until you turn on automatic printing again.
Stopping and restarting automatic printing from the operating panel
Access the key operator system (see page 14).
1
In the 'Basic section', press the 'Automatic printing' function button to select
2
'Stop' to stop automatic printing.
[40] Automatic printing is stopped
Exit the key operator system.
3
As soon as the uninterrupted activity is finished, access the key operator
4
system.
Press the 'Automatic printing' function button to 'Continue'.
5
When ready, exit the key operator system.
6
Stopping and restarting automatic printing using Print Logic
Open the key operator system (see 'Accessing the key operator system using
1
Print Logic' on page 15).
Select the 'Control' tab.
2
56
Océ 31x5E Configuration and special maintenance
Advertisement
Table of Contents
