Loading Rolls Of Copy Media - Oce 9800 User Manual

Loading rolls of copy media

The Océ 9800 has four rolls, each of which may be loaded with copy media of
a different size or type. The operating panel displays the width and type of
media which is loaded on each roll.
After loading a roll, you need to inform the system which type of
Attention:
media was loaded: bond paper, vellum or polyester film. The roll width is
detected automatically.
It is especially important that new copy media is correctly defined when
'Automatic roll change' is enabled (see 'Defining automatic roll change' on
page 99). Correct definition of new copy media also prevents fold errors.
We recommend placing heavy rolls containing 650 feet of 20 lb.
Caution:
paper in position two in the upper media roll compartment. The diameter
of such rolls may not exceed 184mm (approx 7.25").
Loading copy media
Open the appropriate media roll compartment completely (see figure 112).
1
[112] Opening the appropriate media roll compartment
If necessary empty the chip tray (see 'Emptying the chip tray' on page 128).
2
Remove the roll holder from the media roll compartment.
3
Release the locking mechanism by pressing the green button, then remove the
4
core from the holder (see figure 113).
Maintenance 125