Defining Clock Settings; Setting The Current Time And Date - Oce 9700 User Manual

Defining clock settings

The Océ 9700 has an internal clock. This clock must be set accurately. The
clock can be used to switch Océ 9700 on or off automatically. The way in
which the current time and date is displayed can be adapted to local
conventions and must configured by the service engineer.
The reset time is the time the system will wait before it returns to the default
settings. This parameter can be modified.
The 'Timers' card in the 'Machine' section allows you to define the following
time-related settings.

Setting the current time and date

To ensure correct functioning of the time switch you must set the current time
and date. The way in which the time and date are displayed can be adapted to
local conventions.
Selecting the required time and/or date
Access the key operator mode.
1
Open the 'Timers' card in the 'Machine' section.
2
Press the function button 'Time and Date' (see figure 80).
3
Copies: Ready to copy
0
Timers
Zoom
General
......................................................................................................................................
Controller
On/Off-timer
[80] Time and date notation
You can now adjust the day. Press the function button 'Time and Date' again
4
to enter the month, press the function button 'Time and Date' again to enter the
year.
88 Océ 9700 Copier/Printer User Manual
On
From:
08 00.
Monday
Off after
Up to:
4 hrs.
Friday
Work days
................
................
Program
Machine
Time:
12 00
Date:
2 min
Reset
Time and
time
Date
................ ................
Finishing Copy
01 01 95
Automatic
feed