Defining The Fixed Zoom Ratio - Oce 9700 User Manual

Defining the fixed zoom ratio

8 fixed zoom steps have been defined in the Océ 9700 as factory defaults. You
can define your own fixed zoom settings between 25 and 400%.
Defining the zoom steps
Open the 'Zoom' card in the 'Machine' section.
1
Press the function button 'Zoom steps 1' (see figure 84).
2
Copies: Ready to copy
0
Timers
Zoom
General
......................................................................................................................................
Controller
[84] Zoom steps
Set the required value using the numeric or the higher/lower buttons.
3
The higher/lower buttons move up or down with steps of 0.1%. You
Note:
can also use the numeric button, e.g. 353 will lead to a zoom factor of
35.3%.
If required press the function button again to set the other zoom steps.
4
Press the function button 'Zoom steps 2'.
5
Set the required value using the numeric or the higher/lower buttons.
6
If required press the function button again to set the other zoom steps.
7
When ready, quit the key operator mode.
8
92 Océ 9700 Copier/Printer User Manual
................
................
Program
Machine
Vertical
1.000
Horizontal
1.000
Calibration
Zoom steps 1
................ ................
Finishing Copy
70.7% 400.0%
50.0% 282.8%
35.3% 200.0%
25.0% 141.0%
Zoom steps 2