Radiator Coolant - KYMCO MYROAD 700i Service Manual

3
. INSPECTION/ADJUSTMENT

RADIATOR COOLANT

Place the scooter on its center stand.
The reserve tank is under left footboard.
Check the coolant level through the
inspection window (1) at the
left side skirt while the engine is at the
normal operating
temperature with the scooter in an upright
position. If the coolant
level is below the LOWER level mark (3),
remove the left floor
mat, remove the lid screw and reserve tank
lid and the
Reserve tank cap (4) and add coolant mixture
until it reaches the upper
level mark (2).
Remove the left floor mat and remove screw
and reserve tank lid.
Remove reserve tank cap.
Check to see if there are any coolant leaks
when the coolant level decrease very rapidly.
If reserve tank becomes completely empty,
there is a possibility of air getting into the
cooling system.
Be sure to remove all air from the cooling
system.
Reinstall the filler cap.
(1)
F
L
Lid
Rubber plate
MYROAD 700i
(2)
(3)
(4)
Screw
3-16