Cooling System Testing; Radiator - KYMCO G-DINK 300i Service Manual

12. COOLING SYSTEM

COOLING SYSTEM TESTING

RADIATOR CAP INSPECTION
Install the radiator cap onto the radiator
tester and apply specified pressure to it. It
must hold specified pressure for at least six
seconds.
＊
Apply water to the sealing cap surface
before testing.
Radiator Cap Relief Pressure:
0.9±0.15 kg/cm²
Install the radiator tester onto the radiator
and apply specified pressure to it. It must
hold specified pressure for at least six
seconds.
Check the water hoses and connectors for
leaks.
＊
The test pressure should not exceed
1.05 kg/cm². Excessive pressure can
damage the radiator and its hose
connectors.

RADIATOR

RADIATOR INSPECTION
Remove the front cover.
12-3
G-DINK 300i
Radiator Tester
Radiator Cap