Removing And Assembling Covers; Access To The Underside Of The Machine - DURKOPP ADLER 969 Service Instructions Manual

3.3 Removing and assembling covers

For many types of setting work, you will have to remove the machine
covers first in order to access the components. Each explanation of a
setting step includes information on which cover to remove.
This chapter describes how to remove the individual covers. The covers
need to be refitted in reverse order. Re-installation will, therefore, not be
described unless special requirements have to be followed.

3.3.1 Access to the underside of the machine

Cover
To access the components on the underside of the machine, swivel up
the machine head.
Fig. 1: Access to the underside of the machine
(1) - Machine head
(2) - Bartack
14
CAUTION
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before removing or
re-assembling covers.
(3) - Lever
Service Instructions 969 - 06.0 - 03/2019
Working basis
①
②
③