Kyocera TASKalfa 220 Service Manual page 34

2KL/2KK
9. Insert two bands of the key counter wire to
the machine.
10. Connect the 4-pin connector of the key
counter wire to the YC12 on the main/
engine PWB.
11. Pull the other 4-pin connector out from the
aperture of the right middle cover.
12. Refit the rear cover.
1-2-14
Bands
Figure 1-2-18
4-pin
connector
Key counter wire
Figure 1-2-19
Key counter wire
Aperture
YC12
4-pin
connector
Main/engine PWB